Proceedings of Abstracts 13th International Conference on Air Quality: Science and Application

© 2022 The Author(s). This an open access work distributed under the terms of the Creative Commons Attribution Licence (https://creativecommons.org/licenses/by/4.0/), which permits unrestricted reuse, distribution, and reproduction in any medium, provided the original work is properly citedThe presentations at the Conference address the diversity of scales, processes and interactions affecting air pollution and its impact on health and the environment. As usual, the conference is stimulating cross-fertilisation of ideas and cooperation between the different air pollution science and user communities. There is greater involvement of city, regional and global air pollution, climate change, users and health communities at the meeting. The focus of the international conference will be to discuss the latest scientific advances in the understanding of air pollution and its impacts on our health and environment. The conference will also discuss new applications and developments in management strategies and assessment tools for policy and decision makers

An approach to predict population exposure to ambient air PM2.5 concentrations and its dependence on population activity for the megacity London

© 2019 Elsevier Ltd. All rights reserved. This manuscript is licensed under the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International Licence http://creativecommons.org/licenses/by-nc-nd/4.0/.A comprehensive modelling approach has been developed to predict population exposure to the ambient air PM2.5 concentrations in different microenvironments in London. The modelling approach integrates air pollution dispersion and exposure assessment, including treatment of the locations and time activity of the population in three microenvironments, namely, residential, work and transport, based on national demographic information. The approach also includes differences between urban centre and suburban areas of London by taking account of the population movements and the infiltration of PM2.5 from outdoor to indoor. The approach is tested comprehensively by modelling ambient air concentrations of PM2.5 at street scale for the year 2008, including both regional and urban contributions. Model analysis of the exposure in the three microenvironments shows that most of the total exposure, 85%, occurred at home and work microenvironments and 15% in the transport microenvironment. However, the annual population weighted mean (PWM) concentrations of PM2.5 for London in transport microenvironments were almost twice as high (corresponding to 13-20 µg/m3) as those for home and work environments (7-12 µg/m3). Analysis has shown that the PWM PM2.5 concentrations in central London were almost 20% higher than in the surrounding suburban areas. Moreover, the population exposure in the central London per unit area was almost three times higher than that in suburban regions. The exposure resulting from all activities, including outdoor to indoor infiltration, was about 20% higher, when compared with the corresponding value obtained assuming inside home exposure for all times. The exposure assessment methodology used in this study predicted approximately over one quarter (-28%) lower population exposure, compared with using simply outdoor concentrations at residential locations. An important implication of this study is that for estimating population exposure, one needs to consider the population movements, and the infiltration of pollution from outdoors to indoors.Peer reviewedFinal Accepted Versio

Evaluation of an urban modelling system against three measurement campaigns in London and Birmingham

Copyright © 2016 Turkish National Committee for Air Pollution Research and Control. Production and hosting by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).The results of three measurement campaigns are presented in this study. The campaigns have been undertaken at an urban roadside site in London, for more than a year and three months in 2003e2004 and for a year in 2008, and at an urban background site in Birmingham, U.K, for about four months in 2002. The concentrations of PM2.5, PM10, NOx and NO2 were predicted using the roadside dispersion model CAR-FMI, combined with a national U.K. emission model, a meteorological pre-processor, and measured values at urban background stations. The agreement of the predicted and measured hourly and daily time-series has been assessed statistically for all of the campaigns and pollutants. For instance, the Indices of Agreement (IA) in all the campaigns ranged from 0.68 to 0.78, 0.87, from 0.70 to 0.80, and from 0.61 to 0.83 for PM2.5, PM10, NOx and NO2, respectively. However, in case of the campaigns in London, both the PM fractions and the nitrogen oxide concentrations were under-predicted. The model performance in terms of atmospheric stability, wind speeds and other factors was analysed, and reasons for the disagreement of predictions and measurements have been discussed. It is useful to consider the model performance statistics for several measurement campaigns simultaneously as some of the results were found to be specific only to one or two campaigns. The spatial concentration distribution of NOx in London for 2008 has also been presented.Peer reviewedFinal Published versio

Advances in air quality research – current and emerging challenges

This review provides a community's perspective on air quality research focusing mainly on developments over the past decade. The article provides perspectives on current and future challenges as well as research needs for selected key topics. While this paper is not an exhaustive review of all research areas in the field of air quality, we have selected key topics that we feel are important from air quality research and policy perspectives. After providing a short historical overview, this review focuses on improvements in characterizing sources and emissions of air pollution, new air quality observations and instrumentation, advances in air quality prediction and forecasting, understanding interactions of air quality with meteorology and climate, exposure and health assessment, and air quality management and policy. In conducting the review, specific objectives were (i) to address current developments that push the boundaries of air quality research forward, (ii) to highlight the emerging prominent gaps of knowledge in air quality research, and (iii) to make recommendations to guide the direction for future research within the wider community. This review also identifies areas of particular importance for air quality policy. The original concept of this review was borne at the International Conference on Air Quality 2020 (held online due to the COVID 19 restrictions during 18–26 May 2020), but the article incorporates a wider landscape of research literature within the field of air quality science. On air pollution emissions the review highlights, in particular, the need to reduce uncertainties in emissions from diffuse sources, particulate matter chemical components, shipping emissions, and the importance of considering both indoor and outdoor sources. There is a growing need to have integrated air pollution and related observations from both ground-based and remote sensing instruments, including in particular those on satellites. The research should also capitalize on the growing area of low-cost sensors, while ensuring a quality of the measurements which are regulated by guidelines. Connecting various physical scales in air quality modelling is still a continual issue, with cities being affected by air pollution gradients at local scales and by long-range transport. At the same time, one should allow for the impacts from climate change on a longer timescale. Earth system modelling offers considerable potential by providing a consistent framework for treating scales and processes, especially where there are significant feedbacks, such as those related to aerosols, chemistry, and meteorology. Assessment of exposure to air pollution should consider the impacts of both indoor and outdoor emissions, as well as application of more sophisticated, dynamic modelling approaches to predict concentrations of air pollutants in both environments. With particulate matter being one of the most important pollutants for health, research is indicating the urgent need to understand, in particular, the role of particle number and chemical components in terms of health impact, which in turn requires improved emission inventories and models for predicting high-resolution distributions of these metrics over cities. The review also examines how air pollution management needs to adapt to the above-mentioned new challenges and briefly considers the implications from the COVID-19 pandemic for air quality. Finally, we provide recommendations for air quality research and support for policy

Four-year assessment of ambient particulate matter and trace gases in the Delhi-NCR region of India

A key challenge in controlling Delhi’s air quality is a lack of clear understanding of the impacts of emissions from the surrounding National Capital Region (NCR). Our objectives are to understand the limitations of publicly available data, its utility to determine pollution sources across Delhi-NCR and establish seasonal profiles of chemically active trace gases. We obtained the spatiotemporal characteristics of daily-averaged particulate matter (PM10 and PM2.5) and trace gases (NOX, O3, SO2, and CO) within a network of 12 air quality monitoring stations located over 2000 km2 across Delhi-NCR from January 2014 to December 2017. The highest concentrations of pollutants, except O3, were found at Anand Vihar compared with lowest at Panchkula. A high homogeneity in PM2.5 was observed among Delhi sites as opposed to a high spatial divergence between Delhi and NCR sites. The bivariate polar plots and k-means clustering showed that PM2.5 and PM10 concentrations are dominated by local sources for all monitoring sites across Delhi-NCR. A consequence of the dominance of local source contributions to measured concentrations, except to one site remote from Delhi, is that it is not possible to evaluate the influence of regional pollution transport upon PM concentrations measured at sites within Delhi and the NCR from concentration measurements alone

Evaluation of the performance of four chemical transport models in predicting the aerosol chemical composition in Europe in 2005

© Author(s) 2016.Four regional chemistry transport models were applied to simulate the concentration and composition of particulate matter (PM) in Europe for 2005 with horizontal resolution 20 km. The modelled concentrations were compared with the measurements of PM chemical composition by the European Monitoring and Evaluation Programme (EMEP) monitoring network. All models systematically underestimated PM10 and PM2:5 by 10–60 %, depending on the model and the season of the year, when the calculated dry PM mass was compared with the measurements. The average water content at laboratory conditions was estimated between 5 and 20% for PM2:5 and between 10 and 25% for PM10. For majority of the PM chemical components, the relative underestimation was smaller than it was for total PM, exceptions being the carbonaceous particles and mineral dust. Some species, such as sea salt and NO3, were overpredicted by the models. There were notable differences between the models’ predictions of the seasonal variations of PM, mainly attributable to different treatments or omission of some source categories and aerosol processes. Benzo(a)pyrene concentrations were overestimated by all the models over the whole year. The study stresses the importance of improving the models’ skill in simulating mineral dust and carbonaceous compounds, necessity for high-quality emissions from wildland fires, as well as the need for an explicit consideration of aerosol water content in model–measurement comparison.Peer reviewedFinal Published versio

Analysis of UK and European NOx and VOC emission scenarios in the Defra model intercomparison exercise

This is a PDF file of an unedited manuscript that has been accepted for publication. The manuscript will undergo copyediting, typesetting, and review of the resulting proof before it is published in its final form. Please note that during the production process errors may be discovered which could affect the content, and all legal disclaimers that apply to the journal pertainSimple emission scenarios have been implemented in eight United Kingdom air quality models with the aim of assessing how these models compared when addressing whether photochemical ozone formation in southern England was NOx- or VOC-sensitive and whether ozone precursor sources in the UK or in the Rest of Europe (RoE) were the most important during July 2006. The suite of models included three Eulerian-grid models (three implementations of one of these models), a Lagrangian atmospheric dispersion model and two moving box air parcel models. The assignments as to NOx- or VOC-sensitive and to UK- versus RoE-dominant, turned out to be highly variable and often contradictory between the individual models. However, when the assignments were filtered by model performance on each day, many of the contradictions could be eliminated. Nevertheless, no one model was found to be the 'best' model on all days, indicating that no single air quality model could currently be relied upon to inform policymakers robustly in terms of NOx- versus VOC-sensitivity and UK- versus RoE-dominance on each day. It is important to maintain a diversity in model approaches.Peer reviewedFinal Accepted Versio

COVID-19 lockdown induced changes in NO2 levels across India observed by multi-satellite and surface observations

© Author(s) 2021. This work is distributed under the Creative Commons Attribution 4.0 License.We have estimated the spatial changes in NO 2levels over different regions of India during the COVID-19 lockdown (25 March-3 May 2020) using the satellite-based tropospheric column NO 2observed by the Ozone Monitoring Instrument (OMI) and the Tropospheric Monitoring Instrument (TROPOMI), as well as surface NO 2concentrations obtained from the Central Pollution Control Board (CPCB) monitoring network. A substantial reduction in NO 2levels was observed across India during the lockdown compared to the same period during previous business-as-usual years, except for some regions that were influenced by anomalous fires in 2020. The reduction (negative change) over the urban agglomerations was substantial (~20 %-40 %) and directly proportional to the urban size and population density. Rural regions across India also experienced lower NO 2values by ~15 %-25 %. Localised enhancements in NO 2associated with isolated emission increase scattered across India were also detected. Observed percentage changes in satellite and surface observations were consistent across most regions and cities, but the surface observations were subject to larger variability depending on their proximity to the local emission sources. Observations also indicate NO 2enhancements of up to~25%during the lockdown associated with fire emissions over the north-east of India and some parts of the central regions. In addition, the cities located near the large fire emission sources show much smaller NO 2reduction than other urban areas as the decrease at the surface was masked by enhancement in NO 2due to the transport of the fire emissions.Peer reviewedFinal Published versio

Trace gas/aerosol boundary concentrations and their impacts on continental-scale AQMEII modeling domains

Copyright 2011 Elsevier B.V., All rights reserved.Over twenty modeling groups are participating in the Air Quality Model Evaluation International Initiative (AQMEII) in which a variety of mesoscale photochemical and aerosol air quality modeling systems are being applied to continental-scale domains in North America and Europe for 2006 full-year simulations for model inter-comparisons and evaluations. To better understand the reasons for differences in model results among these participating groups, each group was asked to use the same source of emissions and boundary concentration data for their simulations. This paper describes the development and application of the boundary concentration data for this AQMEII modeling exercise. The European project known as GEMS (Global and regional Earth-system Monitoring using Satellite and in-situ data) has produced global-scale re-analyses of air quality for several years, including 2006 (http://gems.ecmwf.int). The GEMS trace gas and aerosol data were made available at 3-hourly intervals on a regular latitude/longitude grid of approximately 1.9° resolution within 2 "cut-outs" from the global model domain. One cut-out was centered over North America and the other over Europe, covering sufficient spatial domain for each modeling group to extract the necessary time- and space-varying (horizontal and vertical) concentrations for their mesoscale model boundaries. Examples of the impact of these boundary concentrations on the AQMEII continental simulations are presented to quantify the sensitivity of the simulations to boundary concentrations. In addition, some participating groups were not able to use the GEMS data and instead relied upon other sources for their boundary concentration specifications. These are noted, and the contrasting impacts of other data sources for boundary data are presented. How one specifies four-dimensional boundary concentrations for mesoscale air quality simulations can have a profound impact on the model results, and hence, this aspect of data preparation must be performed with considerable care.Peer reviewedFinal Accepted Versio